Pirelli P Zero E

Yesterday, I replaced the original Bridgestone A001 soundproof foam tires on my NIO ES6 with Pirelli tires, hoping to improve driving safety and ride comfort. These Pirelli tires cost 50% more than the Bridgestone ones, so I expected a corresponding upgrade in overall performance.
However, issues arose during installation. Both new tires showed road force values between 11 and 12, exceeding the safe standard range. After professional road force calibration, the values were optimized down to 4 and 5 respectively.
After repeated adjustments, I have driven around 200 kilometers so far. The most obvious downside is the prominent noise at high speeds. I checked the weather data and confirmed it was only a gentle breeze of level 2 that day, so the noise is not wind noise. Instead, the tire rolling noise is louder than that of Bridgestone tires, and its sound tone is highly similar to wind noise, which cannot be masked even by turning up the car stereo volume.
In terms of shock absorption, it outperforms Bridgestone tires with excellent vibration isolation when passing speed bumps. Since the total mileage is still low, I need more time to experience its full performance. I hope the driving experience will get better after the tire break-in period. Frankly speaking, the current noise performance is quite disappointing, which is inconsistent with its EU Class A noise reduction rating.